Bike Life. Riding into Seattle via the 520 Trail to pick up some secondary batteries for my R&M.

VLOG is included at the end of the post.

I used to live in Ballard, and the bike trip into Seattle was about 26-27 minutes to the Pioneer Square area, and maybe similar or a few minutes more to anywhere in the central business are including South Lake Union. I have however moved out to Redmond which makes for a vastly longer and more significant trip.

For a ride into the city on Spacey or Pop Rocket it takes about 90-135 minutes to get into the city core or on to King Street Station and Pioneer Square area. Not so much because of distance but because of the half dozen plus hill climbs coming into Seattle from Redmond. However if I circumvent most of the trip and load the bike on the 545 I can get into most points in a reasonable 45-65 minutes. On my Reload bike it’s a whole different story, as the hill climbs are largely nullified and the downhills, I routinely exceed 30 mph easily, which brings the trip in at a consistent 75 minutes to almost anywhere in the city center or Pioneer Square.

The following VLOG is about that ride, and for this specific ride I branch off and head to north Seattle, back to G & O Cyclery to pick up a 2nd pair of batteries for Reload.

Transit Nerd Points Along the Route

The intersection of 40th street in the midst of the Microsoft Campus has always been an utter calamity during commuting hours. Even today as people do start to return to the campus for work, the rush hour time frame can become a mess. As you can see in the picture above though, there’s now a tunnel for the 520 trail that goes under the intersection – entirely bypassing what was sometimes a 2 minute delay for a single intersection. For drivers, it’s still an utter mess, and the on ramps on both sides routinely are backed up down onto the 520 highway for a mile or more. The cross street (i.e. 40th) is also a bit of a mess, with cars backed up in odd ways off onto side streets and 148th nearby.

The simple fact, automobiles are the worst way to transport any volume of people through the area, which makes it obvious when you see the stats why most people arrive at this intersection via transit. The Overlake stop on the opposite side of this intersection to this 520 trail tunnel is often packed with arrivals just from the 545 alone, however many other buses arrive there (542, etc) for a significant number of persons in and out of the area. The 520 path also provides access to much of the Microsoft Campus which delivers a ton of folks.

Eventually this stop will be a significant stop on the Link Route from Bellevue to Redmond. You can see the massive pedestrian overpass that Microsoft has built too, which connects the existing central campus hub (I forget the name of this, Softies what’s the name of this area?) to the new urbanized area on the eastern side of 520. This overpass for pedestrians has all those tent coverings, albeit permanent tent coverings, to cover the pedestrian path, which makes for a rather interesting site as you come along underneath it. The offshoot of this path, which you can see in the picture on the left hand side, is what will provide a way to and from the Overlake Transit & Link Station.

Overall, this intersection and a few others are the primary arrival points for people to Microsoft Campus, which their pre-pandemic metrics showed only 60% – at a suburban campus – arrived by automobile. The other 40% arrived by alternate modes such as transit, bike, or even just walking to campus. For a suburban campus like Microsoft’s this is significant and impressive. Albeit, for an urban campus it’s absolute garbage to have 60% arriving by car, but I’ll give Microsoft a win in this particular situation. As the return to office accelerates at Microsoft, that ratio seems to be holding, if not increasing for alternate modes.

24th to Lake Washington Blvd

At 2:26 I roll into the segment of the “520 Trail” that is largely bike lanes in the road – albeit I discuss the alternative of just using the largely unused sidewalks that are clearly separated from the roadway. In the map image below I tagged the ingress and egress points for the part of the trail with 1 and 2 respectively.

This part of the trail isn’t all that bad really, albeit being a car sewer amongst pleasant interlined streets is a bummer to be forced to deviate onto, one at least gets to entirely bypass any conflict with 520 or Interstate 405. The connection to the Cross Kirkland Corridor however leaves much to be desired, as you’ve got to back track all the way down 120th to loop back around onto the trail. Depending on which way you want to go this can be rather bothersome or work out to your favor, but in either case one has to make sure to note the points to turn onto Northrup Way and then onto 120th. I’ve found it to be somewhat confusing the many times I’ve been by and only recently – after dozens of trips – have I gotten it into my head where and which road to turn onto.

520 Bridge Trail

The 520 Bridge Trail is a superb piece of bike infrastructure, the only thing I’d say it needs to make it even better is a sound barrier like the Woodrow Wilson Bridge has in the Washington DC metro crossing the Potomac. It almost entirely cuts out the incessant, bothersome, and droning of the cars going by on the bridge itself. They’re loud, and as always, being near a major highway like this can be extremely annoying. The fact there are points along the bridge that are scenic overlooks cracks me up as it’s almost headache inducing to stop at them – in spite of them being nice. However, in the end, it’s a barrier divided piece of infrastructure which provides a very safe and seamless way to get from the east side into Seattle proper!

Green Lake Loop

Around 11 minutes into the video I get to have a first ride along the newest and final segment of the loop around Green Lake.

For the inbound trip, that about wraps it up. For more commentary and the ole’ “moving picture” give the VLOG a watch.

Episode 36 – Bike Life. Riding into Seattle via the 520 Trail to pick up some secondary batteries for my R&M.

For more details on Reload, the bike I’m riding, check out my Riese & Muller Load 75 write up here and here.

Bike Life. Testing out the new Insta360 with a tour through Marymoor Park in Redmond, Washington.

Cruising along with Insta360 X3 in hand.

At some point I’ve got to just put a whole post together with the over under on the Insta360 X3 and the GoPro 11s I’ve recently purchased and been using to film this and recent VLOGs. Altogether massive improvements in the tech. The ability to get amazing shots, and absurdly cool shots, angles, and whatever odd views of video have gotten really good.

On this first quick experimental video from the Insta360 X3 I rode through Marymoor Park. while on this ride through the park I provide some introduction to and narrative of the various sections of the park. To complement the video, here are some key links to information about the park and the Insta360 X3 Camera.

The First Insta360 X3 Experience!

I went to Marymoor Park to test out the Insta360 X3 the first time for a few reasons.

  1. I knew it would be spacious and I could bike around without any concern for being in any narrow corridors or difficult to bike areas. I just wanted to be able to focus on getting footage and seeing how the camera performed.
  2. There is plenty of ride time, i.e. uninterrupted path, to travel down and record on. Easy to setup a route and get into a diatribe about whatever feature of the camera.
  3. Finally, I was planning to just hold the selfie stick with the camera on it, and wanted to make sure I wasn’t going to inadvertently hit somebody or something with it!

Observations

Beyond the topics I talked about in the video (scroll to the end of the post for the full video plus time points), there were a number of other post-video observations I made.

1st thing I noticed was, in spite of my effort to have the camera face a particular direction, I really didn’t need to have it face any direction in particular. The mics, which there are several, picked up my voice just fine even while moving. The video worked out regardless of which way the camera was pointing, it literally just needed to be on and out there a few feet away from me to capture everything.

2nd interesting observation, in conflict with my previous observation. After time spent reviewing the videos and moving the camera angle around during edits, it became obvious that there is indeed a very slender area of the 360 degree view that gets blurry where it is stitched together. Basically the very sides, top, and bottom – where the selfie stick attaches – go blurry. Which, this is the physical mechanism that they use to make the selfie stick disappear. A little bit of software to stitch it, and mostly it isn’t immediately visible. However, upon closer observation, you do indeed see that stitch line. Which means, you should at least keep either the front or back camera generally facing in some way toward what you intend to shoot.

3rd observation. The camera, albeit light in a general sense, sits heavy on the selfie stick. It tends to make it bend ever so slightly and in some rare situations, become visible again. More on these selfie stick situations in the more extensive write up on this and the GoPro cameras in the future. But suffice it to say, the selfie stick needs held at particular angles to get good shots. Letting it lean and bend too much can be problematic if you’re expecting it to properly disappear.

Beyond those, more in the near future, I’ve collected a number of observations, tips, tricks, and all that since I’ve been using the camera for a while now. So be sure to subscribe here to the blog, or the VLOG.

Insta360 X3

Marymoor Park

Video Time Points

  • 0:21 – Introduction and equipping the Insta360.
  • 0:47 – The route through Marymoor Park & start of the ride.
  • 6:10 – Wrap up of the ride and plans for the next Marymoor Park exploration.
Episode 30 of the VLOG.

That’s it for this episode. Catch some of the earlier episodes and be sure to subscribe the channel on YouTube. Albeit, if you’re subscribed to this blog, I’ll be posting them here too.

Bike Life. Off to get some bagels in Redmond, Washington via the trails.

This is the – sort of – kick of to my VLOG. I’ve kicked off a new effort, that’s going to not just be code focused or music focused or bike focused, but it’ll be fairly heavily bike focused and metal focused and food focused and coffee focused and…

well you get the idea right?

I’m going to cover topics I like, exploring Redmond, Washington with frequent train trips into Portland, rides into Seattle, and on about the area. With a narrative along the various adventures from yours truly along with elaboration of the various places and their quality of life, cool points of interest, and all that jazz. Along with this, there will be some music, almost all written, composed, and performed by me. All of this is going to be wrapped together into the VLOG these days.

Some of the other criteria I’m attempting to meet for each episode includes:

  1. Keeping each episode under 10 minutes, with a few exceptions here and there.
  2. Focusing on 1-3 key segments, or topics, per episode.
  3. Improving a bit each episode.
  4. So far, doing the ENTIRE production, music, shots, and every other aspect myself.

In this episode, the main mission is finding a bagel shop in Redmond, which maybe I succeed in finding, maybe I don’t. You’ll have to watch the episode to find out! 🤣

Also, for those videographer types, please do critique and leave comments on how I can improve this and pending videos. Shot angles, shot ideas, and all that, I’m keenly interested in learning more about! With that, here is the video I’ve put together, hope you enjoy. Various time points within the video can be found below the link to the video.

  • 0:21 – Introduction.
  • 1:06 – Ride start with narration of the adventure. Plus, check out my edits! I might get pretty good at this video thing yet! 😬
  • 2:49 – Love catching friendly interactions! Lot’s of friendly people here in Redmond!
  • 3:19 – The secret (ok, not really, just hard to see) entrance to the back path road.
  • 5:12 – Blazing Bagel arrival! I also point out, which this will be interesting looking back in several years, at the unfinished light rail and parking garage construction.
  • 6:09 – The Blazing Bagel’s Super Dooper Van, or whatever they call it.
  • 6:17 – A 26 second coffee cup holder review.
  • 6:43 – Wrap up of the ride plus what’s coming up.
Episode 29 of the VLOG.

That’s it for this episode. Catch some of the earlier episodes and be sure to subscribe the channel on YouTube. Albeit, if you’re subscribed to this blog, I’ll be posting them here too.

An Eastside Bakfiet (Cargo Bike) Meet?

UPDATE April 19th, 2023 – Latest on future meetups can be found here!

A discussion has begun on Bikey Discord about a cargo bike meet up on the east side. Bellevue was mentioned, since it’s somewhat central on the east side. Above I’ve numbered some prospective locations that might be good for a meet up of Cargo Crew.

If you’re interested in joining, leave a comment, or join the Discord and join #eastside-cyclists and we’ll get a location sorted out.

Looking forward to meetup #1, maybe we’ll carry some cargo around! (yeah yeah, such a dad pun)

Anyway, the suggested…

Meetup Spots?

  1. Bellevue Downtown Park.
  2. Hidden Valley Park.
  3. This is the intersection of the cross-Kirkland corridor trail and, whatever the one is that is called in Bellevue, where all the light rail vehicles are stored for the new extensions to Link.
  4. The Spring Blvd west end bike landes @ 120th. It’s where several PBLs come together.
  5. I’m not sure what exactly this area is, Spring Corridor or something, but there’s a brewing company and there seems to be some cool areas to meetup here.

and of course, whatever you might propose, I’m game.

After we finalize a spot, it’s just a matter of picking a time.