Category / Riese & Müller Load 75

by Adron

Record Recon Seattle (Metro Area): Mission 1

This post, and VLOG, details the adventures of my first record recon. A set of missions I discussed some time ago and am only now getting around to BLOGing VLOGing them! But hey, better late than never!

This, mission 1, involves traversing the Cross Kirkland Corridor, originating from Redmond and ending in Bellevue so that I can get recon data on Vortex Music & Movies and Silver Platters.

The following video of the logistics, the trip to Vortex, and then from Vortex to Silver Platters along with some thoughts on the pedestrian unfriendliness of the area. Continue reading for maps & more specifics of the trip plus links to the individual record store reviews.

Vortex Music & Movies (Video Review)

Let’s dig in to where this all starts. First, I’ll be departing from home via Education Hill as usual. From there it’ll be a short jaunt down a private road to catch the Sammamish Trail for a distance so short it’s barely worth counting! Next, a turn down 116th to Willow Road, then a turn at the intersection of madness at 124th and Willows Road. There it is the beginning of the hill climb up to the first point to cross over 124th and join the Eastrail Trail onward.

Once you get here, near the Totem Lake Park (Natural Area?), turn and traverse the wetlands on the raised trail. (Check the video to see what it looks like, I show some of it.) Then it’s 120th, to 128th, to 116th (I know, confusing, check the map, it’s actually pretty straight forward.) Then into the strip mall and you’re basically there.

Silver Platters (Bellevue) (Video Review)

The next stop is a local music store chain with locations in Lynnwood and SODO. This involves traveling back down 120th NE and merging back on to Eastrail. From there traveling all the way south to 52nd and dropping down to Lake Washington Drive.

An aside: This section of trail is also referred to as the Cross Kirkland Corridor. However the rail to trails sections that are being converted to trail run from Nakashima Barn in Skagit County, south through to Snohomish, then there’s a big unfinished gap that is in the works, then resumes in Woodinville, merges into the Sammamish Trail through Redmond and into Kirkland, then continues even further south to Renton and beyond. It’s a very very long, and gorgeous trail. Numerous segments aren’t finished, but the Kirkland segment is done and usable to interconnect to many points in the area.

Lake Washington Drive eventually becomes Bellevue Way where Silver Platters is located. Getting to this location via bike was less than stellar. As you can see in the VLOG there were a number of times I ended up traveling in the streets and snaking in and out of cagers stuck at their lights or just sitting in traffic stuck. Mind you, this is just standard daily traffic too, it wasn’t like I was taking this trip at rush hour!

But I digress, made it over to Silver Platters with relative ease. In spite of the less than ideal riding conditions for that last little stretch, the majority of the trip over there was stunningly beautiful. If you haven’t been on the Cross Kirkland Corridor section of the Eastrail you should find time in your busy schedule to get over there. The views of the lake and of Seattle in the distance plus so many other things makes for a very enjoyable trip.

Summarized Ride

In this VLOG and blog I’ve shared my experience of my first mission in the record recon series, where I explore local music stores. Starting from Redmond heading to Totem Lake, then I embarked on a journey along the Cross Kirkland Corridor to Bellevue, aiming to gather recon data on Vortex Music & Movies and Silver Platters. The video captures the logistics of my trip, highlighting the pedestrian-unfriendly areas and the scenic beauty of the route. Despite the challenges, the trip was visually stunning, especially the Cross Kirkland Corridor section of the Eastrail, showcasing breathtaking views of Lake Washington and Seattle. Hope you enjoyed the ride about, and if you’re interested in the record store reviews, and summary of what albums I picked up here is a list to those posts with VLOGs.

by Adron

Bike Life. Testing out the new Insta360 with a tour through Marymoor Park in Redmond, Washington.

Cruising along with Insta360 X3 in hand.

At some point I’ve got to just put a whole post together with the over under on the Insta360 X3 and the GoPro 11s I’ve recently purchased and been using to film this and recent VLOGs. Altogether massive improvements in the tech. The ability to get amazing shots, and absurdly cool shots, angles, and whatever odd views of video have gotten really good.

On this first quick experimental video from the Insta360 X3 I rode through Marymoor Park. while on this ride through the park I provide some introduction to and narrative of the various sections of the park. To complement the video, here are some key links to information about the park and the Insta360 X3 Camera.

The First Insta360 X3 Experience!

I went to Marymoor Park to test out the Insta360 X3 the first time for a few reasons.

  1. I knew it would be spacious and I could bike around without any concern for being in any narrow corridors or difficult to bike areas. I just wanted to be able to focus on getting footage and seeing how the camera performed.
  2. There is plenty of ride time, i.e. uninterrupted path, to travel down and record on. Easy to setup a route and get into a diatribe about whatever feature of the camera.
  3. Finally, I was planning to just hold the selfie stick with the camera on it, and wanted to make sure I wasn’t going to inadvertently hit somebody or something with it!

Observations

Beyond the topics I talked about in the video (scroll to the end of the post for the full video plus time points), there were a number of other post-video observations I made.

1st thing I noticed was, in spite of my effort to have the camera face a particular direction, I really didn’t need to have it face any direction in particular. The mics, which there are several, picked up my voice just fine even while moving. The video worked out regardless of which way the camera was pointing, it literally just needed to be on and out there a few feet away from me to capture everything.

2nd interesting observation, in conflict with my previous observation. After time spent reviewing the videos and moving the camera angle around during edits, it became obvious that there is indeed a very slender area of the 360 degree view that gets blurry where it is stitched together. Basically the very sides, top, and bottom – where the selfie stick attaches – go blurry. Which, this is the physical mechanism that they use to make the selfie stick disappear. A little bit of software to stitch it, and mostly it isn’t immediately visible. However, upon closer observation, you do indeed see that stitch line. Which means, you should at least keep either the front or back camera generally facing in some way toward what you intend to shoot.

3rd observation. The camera, albeit light in a general sense, sits heavy on the selfie stick. It tends to make it bend ever so slightly and in some rare situations, become visible again. More on these selfie stick situations in the more extensive write up on this and the GoPro cameras in the future. But suffice it to say, the selfie stick needs held at particular angles to get good shots. Letting it lean and bend too much can be problematic if you’re expecting it to properly disappear.

Beyond those, more in the near future, I’ve collected a number of observations, tips, tricks, and all that since I’ve been using the camera for a while now. So be sure to subscribe here to the blog, or the VLOG.

Insta360 X3

Marymoor Park

Video Time Points

  • 0:21 – Introduction and equipping the Insta360.
  • 0:47 – The route through Marymoor Park & start of the ride.
  • 6:10 – Wrap up of the ride and plans for the next Marymoor Park exploration.
Episode 30 of the VLOG.

That’s it for this episode. Catch some of the earlier episodes and be sure to subscribe the channel on YouTube. Albeit, if you’re subscribed to this blog, I’ll be posting them here too.

by Adron

Bike Life. Off to get some bagels in Redmond, Washington via the trails.

This is the – sort of – kick of to my VLOG. I’ve kicked off a new effort, that’s going to not just be code focused or music focused or bike focused, but it’ll be fairly heavily bike focused and metal focused and food focused and coffee focused and…

well you get the idea right?

I’m going to cover topics I like, exploring Redmond, Washington with frequent train trips into Portland, rides into Seattle, and on about the area. With a narrative along the various adventures from yours truly along with elaboration of the various places and their quality of life, cool points of interest, and all that jazz. Along with this, there will be some music, almost all written, composed, and performed by me. All of this is going to be wrapped together into the VLOG these days.

Some of the other criteria I’m attempting to meet for each episode includes:

  1. Keeping each episode under 10 minutes, with a few exceptions here and there.
  2. Focusing on 1-3 key segments, or topics, per episode.
  3. Improving a bit each episode.
  4. So far, doing the ENTIRE production, music, shots, and every other aspect myself.

In this episode, the main mission is finding a bagel shop in Redmond, which maybe I succeed in finding, maybe I don’t. You’ll have to watch the episode to find out! 🤣

Also, for those videographer types, please do critique and leave comments on how I can improve this and pending videos. Shot angles, shot ideas, and all that, I’m keenly interested in learning more about! With that, here is the video I’ve put together, hope you enjoy. Various time points within the video can be found below the link to the video.

  • 0:21 – Introduction.
  • 1:06 – Ride start with narration of the adventure. Plus, check out my edits! I might get pretty good at this video thing yet! 😬
  • 2:49 – Love catching friendly interactions! Lot’s of friendly people here in Redmond!
  • 3:19 – The secret (ok, not really, just hard to see) entrance to the back path road.
  • 5:12 – Blazing Bagel arrival! I also point out, which this will be interesting looking back in several years, at the unfinished light rail and parking garage construction.
  • 6:09 – The Blazing Bagel’s Super Dooper Van, or whatever they call it.
  • 6:17 – A 26 second coffee cup holder review.
  • 6:43 – Wrap up of the ride plus what’s coming up.
Episode 29 of the VLOG.

That’s it for this episode. Catch some of the earlier episodes and be sure to subscribe the channel on YouTube. Albeit, if you’re subscribed to this blog, I’ll be posting them here too.

by Adron

Riese & Müller Load 75 Electric Cargo Bike Day 2 – “Reload”

I’m officially naming this bike, like I do all of mine, and thus this bike is now named “Reload”. Goes along with “Mona”, “Spacey”, and “Pop Rocket” among the others.

So not a whole bunch to this blog entry, just a video of day 1 + day 2 riding and GoPro setup on the bike. Enjoy. For my first post on this significant purchase check out the previous post here.